"When our projects require big parts or rapid tooling, we trust juggerbot's expertise for all of our large format printing needs"
-Adam, Vice President of Engineering
Materials
JuggerBot 3D’s printers have been specifically designed to process performance thermoplastics in both filament and pellet form, including but not limited to:
ABS
(Acrylonitrile Butadiene Styrene)
ASA
(Acrylonitrile Styrene Acrylate)
PLA
(Polylactic Acid)
TPC
(Thermoplastic Copolyester)
PET
(Polyethylene Terephthalate)
PETG
(Polyethylene Terephthalate Glycol)
PA6/66
(Polyamide 6/66)
PA6/66 + CF
(Carbon Fiber Reinforced Polyamide 6/66)
HIPS
(High Impact Polystyrene)
PC
(Polycarbonate)
PEKK + GF
(Glass Fiber Reinforced Polyetherketoneketone)
PEEK + CF
(Carbon Fiber Reinforced Polyetheretherketone)
Print Quality
Coarse
Best for concept models and large parts where surface finish is not a factor. Maximize extruder nozzle size and layer resolution to reduce print time and cost.
Standard
Balances build time and precision to showcase better surface finish and tighter tolerances. Recommended for most parts.
fine
Best for parts with tight tolerances and small features, especially if post-processing is not an option. Smaller nozzles and slower printing will result in longer cycle time. While layers will likely still be visible, surface finish is relatively smooth right off the printer.
Post-processing
Finish Level 1
Removal of support material only
Finish Level 2
Removal of support material, sanded surface
Finish Level 3
Removal of support material, surface sanded and primed/painted
Finish Level 4
Removal of support material, machined surface
Finish Level 5
Removal of support material, surface machined and primed/painted
3D-Printing service timeline
